How to Control Stringing in Precision Adhesive Dispensing

by roundnewsrepeat

Fine adhesive threads stretching between a nozzle and a workpiece can undermine appearance, contaminate nearby components, and create inconsistent bond lines. Controlling stringing requires more than reducing fluid output: material rheology, nozzle geometry, motion timing, and pressure release all influence how a deposit separates.

 

Suitable high viscosity dispensing equipment can help manage challenging fluids, while Axxonauto develops industrial dispensing technology for applications that demand stable material delivery and precise positioning.

 

 

 

How to Understand Why Adhesive Forms Unwanted Threads?

Stringing occurs when adhesive continues stretching after the intended deposit should have separated from the nozzle. Instead of breaking cleanly, the material forms a thin filament between the nozzle tip and the substrate. This behavior is especially noticeable with tacky, elastic, or highly viscous formulations.

 

Material properties are often the first factor to investigate. Adhesives with strong cohesive forces or viscoelastic behavior can resist separation even after dispensing stops. Temperature changes may also alter viscosity and elasticity, while prolonged exposure or chemical reactions can make certain formulations increasingly difficult to dispense consistently.

 

Equipment settings can amplify these material characteristics. Excessive pressure, an unsuitable nozzle opening, or abrupt movement away from the workpiece may stretch the adhesive into a thread. A process that produces clean dots at one speed may create tails when the same fluid is applied along a different path or onto a surface with different wetting properties.

 

How to Adjust Fluid Delivery and Nozzle Separation?

Pressure control is an important starting point because residual force can push adhesive from the nozzle after the commanded shot ends. Calibrating the pressure and dispensing duration together helps establish a stable deposit without excessive material delivery. Adjustments should be incremental, with each trial assessed against bead shape, volume, and separation quality.

 

During adhesive dispensing, nozzle lift speed and travel distance influence how the material detaches from the substrate. A rapid upward movement can stretch a filament, whereas a carefully tuned retract motion may encourage cleaner separation. The best movement profile depends on the adhesive’s elasticity, the nozzle-to-surface gap, and the geometry of the target deposit.

 

Nozzle selection deserves equal consideration. A wider opening may reduce resistance for certain thick materials, but it can also increase deposit size beyond the required specification. Tip shape, internal passage length, and material compatibility should be evaluated alongside pressure settings rather than treating the nozzle as an interchangeable accessory.

 

Parameter Effect on stringing Adjustment direction
Pressure Excess residual pressure pulls material Reduce gradually within validated range
Nozzle retract speed Too fast stretches adhesive Tune retract motion to material elasticity
Nozzle height Excessive gap encourages filament Reduce standoff within safe range

 

How to Match Equipment Capabilities With Material Behavior?

Highly viscous adhesives can require substantial force to move through narrow passages, yet excessive pressure may introduce unstable flow or unwanted dispensing after shutoff. Process development should account for viscosity at the actual operating temperature, the required shot volume, and the production cycle. Material datasheets and controlled testing provide a more reliable basis for adjustments than pressure changes alone.

 

The MYC50E THT dispensing machine is designed for fast, stable operation in high-volume THT bonding applications. Its high-pressure valve supports robust material handling, while micrometer-level adjustment allows fine positioning control. A needle verification module reduces the need for manual needle changes, and electronic scale monitoring supports consistent THT dispensing quality.

 

For challenging fluids, high viscosity dispensing equipment should be evaluated as part of the entire delivery system, including the supply method, tubing, valve, nozzle, and motion controller. A restriction in one section can affect pressure response elsewhere, making isolated adjustments less effective. Matching each component to the adhesive’s flow characteristics helps establish a process that remains stable across repeated cycles.

 

How to Validate Results Through Structured Process Testing?

A useful test plan changes one variable at a time. Operators can begin with a baseline recipe, then compare small adjustments to pressure, shot duration, nozzle height, and separation speed. Photographs or microscope images of deposits can help distinguish long filaments from minor residue at the nozzle tip.

 

Measurement should include more than visual appearance. Deposit weight, bead dimensions, cycle-to-cycle variation, and contamination around adjacent components can reveal whether a setting improves separation without compromising volume accuracy. Electronic scale readings are particularly useful when small differences in delivered material affect bond quality.

 

Production conditions must also be represented during validation. Adhesive temperature, time since preparation, idle periods, and substrate surface condition may differ between a laboratory trial and a full shift. Documenting the approved settings and defining clear inspection criteria makes it easier to identify process drift and repeat successful adjustments.

 

Conclusion

Stringing is best controlled by treating adhesive separation as a combined material, equipment, and motion problem. Stable pressure, suitable nozzle geometry, carefully tuned movement, and repeatable measurement provide a stronger foundation than relying on a single adjustment. Axxonauto offers industrial dispensing solutions relevant to automated bonding workflows, while effective process settings must be validated against the adhesive, substrate, and production requirements involved.

 

FAQs

What Causes Stringing in Precision Adhesive Dispensing?

Common causes include high material elasticity, excessive residual pressure, unsuitable nozzle geometry, and poorly timed nozzle movement. Temperature and changes in adhesive condition can also affect how cleanly the material separates.

 

Can Reducing Pressure Stop Adhesive Stringing?

Lower pressure may reduce unwanted material flow, but an excessive reduction can create incomplete deposits or inconsistent output. Pressure should be adjusted alongside shot duration and nozzle movement, with each result measured.

 

Does Nozzle Retraction Help Reduce Stringing?

A controlled retract motion can help separate adhesive from the nozzle, depending on the valve design and material properties. Retraction distance and speed should be tested carefully because an unsuitable setting may draw out a longer filament.

 

How Can Stringing Be Evaluated During Production?

Inspect the deposit and surrounding area, then track shot weight, bead dimensions, and cycle consistency. Comparing these results with an approved baseline helps identify whether a process adjustment improves separation without changing the required deposit.

 

Related Posts

Leave a Comment